Guide / Accounts payable

How to automate supplier invoice checks

Before you pay a supplier invoice, someone should check it against what you ordered and what actually arrived. That's the three-way match. Here's what it checks, how it's done by hand, what software can take over and what a person should still decide.

· 6 min read

What a three-way match checks

It compares three documents. The purchase order says what you ordered and at what price. The receiving record says what actually arrived. The vendor invoice says what you're being billed. If all three agree, you pay. If they don't, you dispute it before paying.

What you checkAgainstWhat it catches
Unit price on each lineThe purchase order or contract pricePrice creep and discounts that weren't applied
QuantitiesThe receiving recordItems billed but never received, short shipments
Line itemsThe purchase orderItems nobody ordered
Invoice numberInvoices already enteredDuplicates, including near-matches like INV-1043 and 1043
Sales taxYour resale or exemption certificatesTax charged on items you buy for resale
Vendor detailsYour vendor master fileAn unknown vendor, a new remit-to address, a changed bank account
TermsWhat you agreedDifferent payment terms, freight you didn't agree to, a missed early-payment discount

Services work differently: there's no receiving record, so you match the invoice to the PO and get sign-off from whoever ordered the work. That's a two-way match.

How it's done by hand

  1. 01
    Gather the documents

    The invoice arrives by email, as a PDF or on paper. The receiving record is at the dock, signed by whoever took the delivery. The PO is in your system or a spreadsheet.

  2. 02
    Find the PO and the receiving record

    Many invoices don't reference the PO number, so someone searches by vendor, date and items.

  3. 03
    Compare line by line

    Price and quantity on every line. Then tax, freight and the total.

  4. 04
    Check it isn't already entered

    Search for the same invoice number from the same vendor, and for the same amount on the same date.

  5. 05
    Log the differences and dispute them

    With the line, the agreed price and the billed price. The vendor sends a credit memo or a corrected invoice.

  6. 06
    Release it for payment

    Only then does it go into the payment run.

Each invoice takes a few minutes. With hundreds a month, teams spot-check: the big ones get matched, the small ones get paid. Whatever isn't checked gets paid anyway.

Set your tolerances once

Small differences happen: rounding, a freight charge that varies, a price that moved a few cents. Decide in writing what you accept without review. For example, a price difference under 1% or $25 per invoice, whichever is smaller. Anything above that gets stopped.

Tolerances are what make automation work. Without them, every cent stops an invoice and the team goes back to checking by hand.

What you can automate

Almost all of the mechanical work. An AI agent, a program that reads documents and follows your rules, can run the full match on every invoice:

  • Read the invoice however it arrives (PDF, photo or a file from the vendor) and turn it into data: vendor, number, date, lines, tax and total.
  • Find its purchase order and receiving record, even when the invoice doesn't reference them.
  • Compare each line: price against the PO, quantity against what was received, item against what was ordered.
  • Recalculate tax and the total, and check the vendor against your vendor master.
  • Look for duplicates across everything entered, not just this month.
  • Prepare the dispute: the line, the agreed price, the billed price and the difference.

By handThe team checks a sample: the big invoices.

AutomatedEvery invoice gets checked the same way.

By handA discrepancy shows up after payment, if at all.

AutomatedA discrepancy stops the invoice before payment.

By handDisputes are built from memory.

AutomatedDisputes go out with the line, the agreed price and the billed price.

Example · USD · Not a real invoice

One invoice, matched line by line

LinePurchase orderReceivedInvoiceResult
Bearing 620420 × $45.002020 × $49.50Price 10% over the PO
Oil seal 35 × 5240 × $18.003040 × $18.0010 billed, not received
V-belt A42——5 × $62.00Not on the PO
Grease, 1 lb10 × $7.001010 × $7.00Matches

To dispute before paying, before tax$580.00

$90.00 on price, $180.00 on quantity and $310.00 for an item nobody ordered. The grease goes through without anyone looking at it.

The rule that holds it together: what matches goes through; what doesn't gets stopped and reaches a person with the case already built.

What a person should still decide

  • Tolerances. What you accept without review. Decided once, applied every time.
  • Announced price increases. If the vendor gave notice, someone has to accept it and update the agreed price.
  • Substitutions. A different brand or size arrived. Whoever does the buying decides if it's acceptable.
  • Bank account changes. Confirm by calling a number you already have on file, even if the email looks like it came from the vendor. It's a common fraud.
  • Payment. The system prepares it; a person releases the money.

Where to start

  1. 01
    Measure how it works today

    How many invoices a month, from how many vendors, how long each one takes and how many actually get checked.

  2. 02
    Get the documents in order

    Every purchase with a PO, every delivery with a signed receiving record, somewhere you can search. Without a PO there's nothing to match against. If they live on paper or in scattered spreadsheets, start there: business software puts them in order.

  3. 03
    Send invoices to one inbox

    An address like ap@yourcompany.com, with paper invoices scanned into it.

  4. 04
    Write down the rules

    Tolerances, who approves which amounts, and what happens to an exception.

  5. 05
    Start with your biggest vendors

    The ones that bill you the most. That's usually where most of the money is.

  6. 06
    Run it in parallel for a month

    The system flags, the team checks as usual, and you compare. When they agree, the team moves to reviewing exceptions only.

How we run it at Relevo

We train an agent on your rules, connect it to your AP inbox and your purchasing records, and run it for you: when a vendor or an invoice format changes, we adjust it. You can hire it on its own, without the Relevo platform.

How the process works: supplier invoice checks. The other processes we run: automation.

Before you start

Practical questions.

Can I automate invoice matching without changing my accounting software?

Yes. An agent can read invoices from your inbox and match them against the purchase orders and receiving records you already keep, in your software or in spreadsheets. What you need is for those records to exist and be searchable.

What's the difference between two-way and three-way matching?

A two-way match compares the invoice with the purchase order. A three-way match adds the receiving record, so you only pay for what actually arrived. Services usually get a two-way match plus the requester's approval.

What about paper invoices?

Scan or photograph them and they're read the same way. Keep one way in, so none of them end up in a drawer.

How much does it cost to automate?

It depends on your volume and where your records live today. We work it out with you, against the hours the checks take now.

You might also need

Tell us how you check invoices today.

We'll measure the process with you and tell you which part is worth automating.

Discuss your invoice checks ↗